Operators
Pump controllers, ESPs, gas lift, and tank batteries. Know a well is down in minutes, not on tomorrow’s route.
IoT & machine data
Every machine in the field, live from the office.
We connect the equipment you already run, in the field or in the plant: pump controllers, compressors, pipelines, tanks, generators, and rotating equipment. Rugged edge gateways stream readings to the Crudexa cloud, where your team sees every site live, gets alarms they can act on, and keeps the history to learn from. It works on its own or with the Crudexa ERP.
A compressor’s vibration climbs past its alarm. The Field Agent matches the pattern to an earlier failure and proposes a work order, and it opens the moment someone approves.
Who it’s for
Anyone with equipment worth watching.
You don’t need the Crudexa ERP to use machine data. Alarms can open work orders in Crudexa, or in the maintenance system you already use.
Midstream
Compressor stations, pipeline pressure and flow, meters, and tank farms, all on one live screen.
Refineries & plants
Pumps, fans, steam traps, and tanks your historian doesn’t cover, connected alongside the systems you already run.
Service & rental companies
Rental compressors, generators, frac pumps, and water transfer. Bill by the hours equipment actually ran, and show customers the proof.
How it works
From the wellhead to the work order.
- 01
Sensors & controllers
Pump-off controllers, VFDs, PLCs, flow computers, and add-on sensors for pressure, temperature, level, and vibration.
- 02
Edge gateway
Polls devices over Modbus, OPC UA, or MQTT, buffers readings when the link drops, and forwards them over cellular or satellite.
- 03
Crudexa cloud
Stores every reading, runs your alarm rules, and serves live dashboards and history to the office and the field.
- 04
ERP & your systems
Alarms open work orders in the Crudexa ERP or the system you already run, and an open API sends the data anywhere else it needs to go.
What we connect
The equipment you already have.
- Rod pump controllers
- ESP drives
- Gas lift & injection
- Compressors
- Separators & heater treaters
- Tank levels & LACT units
- Pipeline pressure & flow
- Flare & emissions meters
- Pumps, fans & rotating equipment
- Steam traps
- Generators & power
- Water transfer pumps
- Sensors you add
Live dashboards
Every site and machine on one screen, from a pad overview down to a single compressor’s readings, refreshed as data arrives.
Alarms that act
Thresholds and trend rules that page the right person and open a work order with the readings attached, in Crudexa or your own system.
Store and forward
Gateways hold readings through dead zones and outages, then upload them in order, so history has no gaps.
History & analytics
Keep years of readings to compare runs, spot slow failures early, and back up decisions with data instead of memory.
Open API & exports
Send machine data to your historian, data warehouse, or BI tools. Your data stays yours, in formats you can use.
Any machine
If it has a controller, we can read it. If it doesn’t, we fit sensors and a gateway and bring it online.
Start with one site.
Pick a pad, a compressor station, or a unit in the plant. We’ll connect it, put it on a dashboard, and wire its alarms into your workflow.